top of page
Search

Heat-Treated Pallets for Export: What South Florida Shippers Need to Know

M2 Pallets
Nov 6
4 min read

If your freight leaves the country on a wooden pallet, the pallet has to meet international rules too. A shipment can be held at its destination because the wood underneath wasn't treated or marked correctly, even when the product itself is fine. For businesses shipping through Port Miami, Port Everglades or Miami International Airport, that can mean delays, extra fees and frustrated customers.


This guide explains what the rules require, how to read the stamp on an export pallet, and what to ask your pallet supplier before you place an order.


What ISPM-15 Is

ISPM-15 is the international standard for wood packaging used in shipping. It was created by the International Plant Protection Convention to stop insects and plant diseases from traveling between countries inside pallets, crates and other wood packaging. Most countries require it for imported goods.


The standard covers solid wood packaging, including pallets, skids, crates, boxes and dunnage (the loose wood used to brace cargo). In the United States, the program is overseen by the USDA's Animal and Plant Health Inspection Service (APHIS).


What Makes a Pallet Export-Ready

A compliant pallet needs two things: the wood has been treated with an approved method, and it carries the official mark that proves it.


  • Approved treatment. Heat treatment is the most common method in the U.S. The core of the wood must reach at least 56°C (133°F) for at least 30 minutes in a row. Fumigation with methyl bromide is also recognized, but many countries restrict it, so heat treatment is the usual choice.

  • Debarked wood. Bark can carry pests, so the wood must be debarked before treatment.

  • The official mark. Each pallet must carry the ISPM-15 stamp, applied by a facility registered under an approved program.


Some packaging doesn't need treatment at all, including plastic pallets, wood thinner than 6 mm, and processed wood such as plywood, particleboard and OSB.


How to Read the ISPM-15 Stamp

The stamp is usually burned or printed on at least two opposite sides of the pallet. It includes:


  • The IPPC symbol, which looks like a wheat stalk.

  • A country code, such as US.

  • A registration number that identifies the facility that produced or treated the wood.

  • A treatment code: HT for heat treatment, MB for methyl bromide, or DH for dielectric heating.


One common mix-up: a "KD" (kiln-dried) marking is not the same as HT. Kiln drying reduces moisture in lumber. It only counts for export if the wood was treated to the heat treatment standard and carries the IPPC stamp.


Common Problems That Hold Up Shipments


  • Pallets with no stamp, or a stamp that is faded or unreadable.

  • Repaired pallets where the replacement boards weren't treated. Repairs need treated wood too, and heavily rebuilt pallets may need to be treated and stamped again.

  • Treated and untreated pallets mixed in the same load.

  • Untreated bracing or dunnage in a container, even when the pallets themselves are compliant.


When packaging doesn't comply, the destination country can require it to be treated, refuse it, or destroy it, and the cost usually falls on the shipper or the buyer.


New or Recycled Pallets for Export?

Both new and recycled pallets can meet the standard as long as each pallet is properly treated and stamped. M2 Pallets offers heat-treated recycled pallets for export shipments. A used pallet with a clear HT stamp that hasn't been repaired with untreated wood can still be compliant. Many exporters choose new heat-treated pallets for regular shipments because every pallet is the same and every stamp is fresh. For domestic shipping and storage, recycled pallets or new standard pallets without heat treatment are usually enough.


Export Loads That Need a Custom Size

Export freight doesn't always fit a standard 48" x 40" pallet. Machinery, building materials and oversized cartons often need a pallet built to fit. M2 Pallets offers custom-sized pallets that can be heat-treated and stamped like standard ones, so you don't have to choose between the right size and compliance. See our custom-sized pallets page for more on custom builds.


What to Ask Your Pallet Supplier


  • Are the pallets heat-treated and stamped with the IPPC mark for ISPM-15 compliance?

  • Will you provide a certificate or other documentation with the order?

  • If any pallets are repaired or custom-built, is that wood treated too?

  • Can you meet my size, quantity and delivery date?


Import rules can vary by country, so it's also worth checking your destination's requirements with your freight forwarder or customs broker before you ship.


Heat-Treated Pallets from M2 Pallets

M2 Pallets supplies heat-treated pallets that meet ISPM-15 standards to businesses across Miami-Dade, Broward, Palm Beach and nearby areas. We offer standard 48" x 40" GMA pallets, recycled pallets, and custom-sized pallets that can be heat-treated and stamped for international shipping. Our heat-treated pallets also come with a certificate of compliance.


Shipping overseas soon? Request a free quote or call 954-248-8880. Let us know the pallet size, how many you need, the destination country and your ship date, and we'll take it from there.

 
 
bottom of page